地球科学

Common challenges

Geological site characterization is essential to prevent natural hazards, improve urban infrastructures and access to water, energy and mineral resources. Site investigations are important to establish a geological history and require researchers to characterize and understand geotechnical complexities that contribute to formation of the material, subsequent modification by deformation and diagenesis, as well as weathering processes. This knowledge not only enables researchers to recover or understand these natural resources, but allows them to perform this with minimal impact to the environment. Useful analyses to elucidate these geotechnical complexities include:

  • Analyze overgrowth, cementation, microfractures, and fluid flow in metamorphic samples
  • Measure trace elements, internal structures, and textural features in small sample areas
  • Classify authigenic and detrital (mineral) phases and their distribution
  • Reconstruct the chronology for metamorphic processes, such as mineral and phase formations

For more in-depth information, please see our Geoscience Application Note.

Innovative techniques

To adequately characterize and understand geological materials, you must first ensure each specimen is of the highest quality to resolve the material interface and properly controlled so you manipulate it, when necessary, under environmental stimuli. Once prepared, several techniques are available to better understand the relationship between microstructure, defects and the optical properties of materials.

Unique insight into the chemical and electronic properties of materials at the microscopic level.
For more information, visit WhatIsCL.info.
Award winning, high resolution imaging tools help you to understand material growth, devices ultrastructure and failures.
Atomic resolution chemical and compositional analysis.
Family of imaging techniques to enhance, map and quantify elements and chemicals in an image with nanometer resolution.
Systematic method to generate a spatially resolved distribution of EELS data.
High-performance tools to cut, etch, polish and freeze samples for your unique SEM, TEM or STEM application.
Useful to elucidate elemental or chemical characterization of a sample.
Helps you examine crystallographic orientation or texture of materials.

Visit solar, utilities and environment for related applications.

Enabling results

Reveal overgrowth and cementation processes

Color cathodoluminescence images reveal cementation processes in reservoir rocks. In the left image you can see low temperature quartz cement (bluish) and a later (hotter) overprint (reddish) along grain boundaries in the overgrowth. In the right image, you can see well developed overgrowth cement with multiple zoning. Image courtesy of Dr. Juergen Schieber, Indiana University Shale. Acquired on the ChromoCL2™ system.

Measure trace elements, internal structures, and zoning

Here you can see a large collection of zircon grains were imaged to reveal full zonation structure and late rims that are only observable with cathodoluminescence. Field stitching software was used to create a 70 million pixel image with a field of view that is several millimeters in size. Results demonstrate that exact pixel registration between all signals allows you to directly correlate between topography, composition and trace element chemistry over large areas. Sample courtesy of Geological Survey Finland.

Analyze microfractures and fluid flow

Distribution of microfractures in geological materials can provide insight into emplacement events, such as damage associated with tectonic faulting. The below image shows how cathodoluminescence can be a valuable tool to reveal microfractures under high spatial resolution conditions (low accelerating voltage, low CL signal). Image courtesy of After Laubach et al., Journal of Structural Geology 2005. 

Cathodoluminescence provides unrivaled sensitivity to trace element composition so you can observe chemical overprinting where fluid flow along cracks has caused alteration in a polycrystalline diamond sample.

Identify minerals, phases, and their distribution

These results demonstrate the cathodoluminescence can reveal mineral attributes that are not available through alternative techniques. When compared, an EDS/BSE analysis (left) shows uniform distribution of quartz across the sample, while the secondary electron image (right) shows that there are a few large grains of authigenic and detrial quartz.

Reconstruct geological processes

To better understand the genesis of polycrystalline diamonds, you can compare the cathodoluminescence spectral characteristics to determine the cause of irradiation or point defects. For this sample, (a) a composite cathodoluminescence image of polycrystalline diamond was created using red, green, and blue spectrally filtered cathodoluminescence images. When cross-correlated with spectroscopy results, individual elements or substances were identified within the sample. Results showed a radioactive fluid ingress along grain boundaries lead to the radiation halo effects that were observed (yellow). Data courtesy of Dr. E. Vicenzi, Smithsonian Institute.