Heating and Environmental Cell Holder, HHST4004

The HHST4004 - an environmental cell heating holder for TEM allows the specimen to be loaded into a gas or vacuum environment, heated up to 800 C* and then transferred into the TEM without exposure to atmosphere. Alternatively a reactive specimen may be loaded into the holder in a glove box (inert gas) and then transferred to the TEM. Available for all TEMs.

The basic system includes:

Environmental cell heating holder (single tilt)

Screwed insert

Temperature range +20 to +800 degrees C (in cell)* with environmental gas reaction chamber

Vacuum pumping port

Gas inlet fitting and integral isolation gate valve

Digital temperature controller

Tip protection sleeve with pump out fitting, pump out tool

There is an optional viewing window for the environmental cell

There is an Special Optional Version, HFST4005 with benchtop heating chamber,
to 1200°C. Please enquire for details.

*please note Max C temperature limit depends on TEM. Please enquire for details.

Alternative:
A high resolution vacuum transfer holder, VTST4006

Single tilt holder with vacuum transfer chamber

Isolation gate valve

Screwed insert

Tip protection sleeve

Alternative:
A high resolution Vacuum Transfer Cooling holder for the TEM, CHVT3007

The basic system includes:

Single tilt vacuum transfer cooling holder with integral gate valve, nitrogen dewar

Facility for transferring in a gas environment,

Temperature sensor, heater and digital temperature controller,

Tip protection sleeve with pump out fitting, pump out tool

Optional Be insert available for microanalysis