Publications

151 - 160 of 266 publications
CSV

Assessment of the strain depth sensitivity of Moiré sampling scanning transmission electron microscopy geometrical phase analysis through a comparison with dark-field electron holography

Ultramicroscopy
2021

Pofelski, A.; Whabi, V.; Ghanad-Tavakoli, S.; Botton, G.

Precise measurement of the electron beam current in a TEM

Ultramicroscopy
2021

Krause, F. F.; Schowalter, M.; Oppermann, O.; Marquardt, D.; Müller-Caspary, K.; Ritz, R.; Simson, M.; Ryll, H.; Huth, M.; Soltau, H.; Rosenauer, A.

Effective toluene oxidation under ozone over mesoporous MnOx/γ-Al2O3 catalyst prepared by solvent deficient method: Effect of Mn precursors on catalytic activity

Environmental Research
2021

Reddy, K. H. P.; Kim, B. -S.; Lam, S. S.; Jung, S. -C.; Song, J.; Park, Y. -K.

On the effect of carbon content and tempering on mechanical properties and stiffness of martensitic Fe–18.8Cr–1.8B–xC high modulus steels

Materials Science and Engineering: A
2021

Baron, C.; Werner, H.; Springer, H.

Corrosion of lithium metal anodes during calendar ageing and its microscopic origins

Nature Energy
2021

Boyle, D. T.; Huang, W.; Wang, H.; Li, Y.; Chen, H.; Yu, Z.; Zhang, W.; Bao, Z.; Cui, Y.

Scanning transmission helium ion microscopy on carbon nanomembranes

Beilstein Journal of Nanotechnology
2021

Emmrich, D.; Wolff, A.; Meyerbröker, N.; Lindner, J. K. N.; Beyer, A.; Gölzhäuser, A.

Key role of exopolysaccharide on di-butyl phthalate adsorbing by Lactobacillus plantarum CGMCC18980

Applied Microbiology and Biotechnology
2021

Fan, Y. -H.; Shen, Y. -L.; Lin, Z. -W.; Zhou, Y.; Ye, B. -C.

Simplified approach for preparing graphene oxide TEM grids for stained and vitrified biomolecules

Nanomaterials
2021

Kumar, A.; Sengupta, N.; Dutta, S.

Effect of aging time on the microstructural characterization and corrosion resistance of Al-4.5 Cu-1Li-0.4 Mg-0.4 Ag-0.4 Mn-0.5 Zn alloys

International Journal of Metallurgy and Metal Physics
2021

Chen, W.; Ding, D.; Zhang, W.; Xiao, D.

Development of high strength and ductile Zn-Al-Li alloys for potential use in bioresorbable medical devices

Materials Science and Engineering: C
2021

Farabi, E.; Sharp, J. A.; Vahid, A.; Fabijanic, D. M.; Barnett, M. R.; Gallo, S. C.

Pages